Table of Contents
Advertisement
Internet Server User's Guide
ule table. If a request is received to access the
internet outside of the time limits defined in
the schedule table, the internet server will
not dial out.
Traffic Control
The traffic control feature allows you to define how the
internet server manages traffic between the two WAN
ports, assuming that both have connections to the inter-
net. The default traffic control setting is by User
Connection with 6 users per port.
•
By User Connection – This setting man-
ages traffic on the two WAN ports by user.
When choosing this option, you must define
the number of users for each port. The first
users accessing the Internet will cause WAN
1 to dial out and the users will all share the
WAN 1 bandwidth. After the designated
number of WAN 1 users is achieved, further
users accessing the internet will cause WAN 2
to dial out and establish a connection. Addi-
tional users will then be placed on WAN 2.
After the designated number of WAN 2 users
has been achieved (and WAN 1 is still full)
then each additional user will alternatively be
placed first on WAN 1 and then on WAN 2.
The benefit of this setting is that WAN 2 will
only be used when there is a high demand for
internet access.
For example, WAN 1 and WAN 2 are each set
to carry 6 users apiece. The first user to ac-
cess the internet will cause WAN 1 to dial up
and his access will take place on WAN 1. The
next 5 people to use the internet will also use
48
Configuration Settings
Advertisement
Table of Contents
