Table of Contents
Advertisement
In
Ln
Mn
Nn
On
AT Commands
Go on-hook (hang-up)
0
Go off-hook
1
Identification Command
Display the product identification code.
0
Report pre-computed checksum.
1
Report O.K.
2
Report firmware revision, model and interface
3
type.
Report response programmed by an OEM.
4
Report the country code parameter.
5
Report modem data pump model and code ver-
6
sion.
Speaker Volume
Off
0
Low (Default)
1
Medium high
2
High
3
Speaker Control
Speaker always off
0
Speaker on during handshaking and off while
1
receiving carrier. (Default)
Speaker on during handshaking and while re-
2
ceiving carrier.
Speaker off during dialing and receiving carrier
3
and turn speaker on during answering.
Automode Detection – This command interacts
with the F command and should be thus used.
Disabled
0
Enabled (Default)
1
Return to Data Mode – after using +++ command
to switch to command mode.
Internet Server User's Guide
63
Advertisement
Table of Contents
