Maximum Idle Time; Operation Mode - D-Link DP-692 User Manual

Internet server/hub
Table of Contents

Advertisement

Internet Server User's Guide
Description: A Domain Name Service (DNS) server ad-
dress is used to translate URLs into their corresponding IP
addresses.

Maximum Idle Time

This variable allows you to set an idle time after which the inter-
net server will automatically disconnect the WAN connection.
Setting an idle time lets you keep from staying logged-in to your
ISP when no one is using the internet.
Options: A time duration from 1 to 65535 minutes.
Default Value: 30 minutes
Must Be User Modified? No.
Description: The system will automatically disconnect the
WAN link if the port is inactive for the time set.

Operation Mode

Options (sub-menus):
♦ Mode: LAN-to-WAN / LAN-to-LAN; Default is LAN-
to-WAN operation.
♦ LAN-to-LAN Internet server -> Global IP Ad-
dress:
segment when used in LAN-to-LAN mode only.
♦ LAN-to-LAN Internet server -> Subnet Mask: (as
subnet mask above)
♦ LAN-to-LAN Internet server -> Default Gateway:
Router's IP Address.
Default Value: Mode
36
Internet server's address for the router
LAN-to-WAN
=
Configuration Settings

Advertisement

Table of Contents
loading

Table of Contents