D-Link DP-692 User Manual page 30

Internet Server User's Guide
through cable into the 10X LAN port on the internet server, and
the other end into a normal (non-Uplink) port on a hub or switch
(as shown below). Both devices can be receiving power when
making this connection. Please note that when making this con-
nection the button next to the 10X port should be in the Uplink
(OUT) position.
DP-692 Internet Server
Hub
Please refer to the following table when making twisted-pair con-
nections:
DEVICE PORT
USED
Normal
Internet
Server
Uplink
14
LAN Uplink Connection
DEVICE BEING
CONNECTED
Hub or
Switch
Server (or PC)
Hub or
Switch
Server (or PC)
PORT CABLE TO USE
TYPE
Normal Crossover (X)
Uplink Straight-Through (||)
Straight-Through (||)
Normal Straight-Through (||)
Uplink Crossover (X)
Crossover (X)
Installation