Table of Contents
Advertisement
Internet Server User's Guide
Modem AT Commands
Options (sub- settings):
♦ Init. String: <AT&F> (default)
♦ Dial Prefix String: <ATDT> (default)
♦ Hang-up String: <~~~+++~~~ATH0> (default)
Description: Modem AT commands are used to configure
and operate the modem when it is necessary to control set-
tings such as the speaker volume, line modulation, or
handshaking protocol.
Note:
Note that the initialization string modem must set the following:
Fixed baud rate (i.e., serial data rate adjustment dis-
1.
abled).
Data Carrier Detect (DCD) to follow carrier signal
2.
status.
Data Set Ready (DSR) to on while the modem is on.
3.
Data Terminal Ready (DTR) to off to hang-up.
4.
Enable RTS/CTS flow control.
5.
40
See your modem user's guide for information
about initialization string settings and other
modem commands.
Configuration Settings
Advertisement
Table of Contents
