Ip Office Avpp Setup - Avaya IP Office 3600 Series Installation Manual

3.4 IP Office AVPP Setup

This process is used to add the network location of the AVPP unit to the IP Office configuration.
1. Start IP Office Manager and receive the configuration from the IP Office control unit.
2. Click on System.
3. Select the System tab.
4. Set the AVPP IP Address to match the static IP address of the AVPP unit.
5. If the IP Office is being used for DHCP support of the 3600 Series phones, set the TFTP Server IP Address to match
the IP address of the TFTP server from which the 3600 Series handsets should get their software.
· If otherwise, the location of the TFTP server for the 3600 Series phones should be set through the DHCP server
or through the configuration of the handsets if using static IP configuration.
6. Click OK.
7. Click or select File | Save Configuration. to send the updated configuration back to the IP Office control unit.
Click OK.
3600 Installation
IP Office
AVPP Installation and Configuration: Initial AVPP Configuration
15-601082 Issue 05b (23 September 2008)
Page 31