UTStarcom CDM7075 User Manual page 84

CALLING USING VOICE ACTIVATED DIALING
1.
To call a number saved in your contact list, press
You will hear and see "Please Say a Command".
2.
After the beep, say "Call".
3.
You will hear and see "Please say a Name".
4.
After the beep, say the name of contact.
5.
You will hear "Did you say [name] [phone number]" and the
contact will be displayed on screen. Say yes if the name and phone
number were correct.
If more than one phone number exists for the contact you are
Note
calling, the primary number will be the one chosen for voice
activated dialing.
6.
The phone will dial the number.
INFORMATION
1.
In idle mode, press
Command" appears in the display and is pronounced through the
speaker.
2.
Scroll to a menu item then press
3.
Your phone displays the information to help you use that menu
item and plays it through your speaker.
. After a brief pause, "Please Say a
[INFO].
TOOLS
.
83