Call Alert - UTStarcom CDM7075 User Manual

PROMPTS
The prompts settings, "Mode", "Timeout', and "Speed" settings will
allow you to set how you are notified by the voice command system, the
duration in which you can respond, and how fast the System will play
the prompts to you, when in Prompts or Readout mode.
1.
Press [MENU], then press
Tools" menu. Press
2.
Select "Mode" or "Timeout".
• Mode : Select "Prompts" or "Tones Only".
• Timeout : Select "5 seconds" or "10 seconds".
3.
Press to save the setting.

CALL ALERT

The "Call Alert" setting controls how you are notified when receiving a
call. "Name + Ring" will first announce the name and then play the set
ring tone. "Ring only" will play the set ring tone only. "Name Repeat"
continuously, states the name or number until the call is answered or
incoming call alert ends.
1.
Press [MENU], then press
Tools" menu. Press
2.
Select "Ring Only", "Name+Ring" or "Name Repeat".
3.
Press to save the setting.
2 times for the "Settings &
"VR Setting", then
2 times for the "Settings &
"VR Setting", then
SETTINGS
"Prompts".
"Call Alert".
79