Xerox® Documate 3120 Specifications - Xerox DocuMate 3120 User Manual

® ®
Xerox DocuMate 3120
Uninstalling Visioneer Acuity™:
Visioneer Acuity is automatically installed when you install the scanner driver using the installation
disc. You can also download the Visioneer Acuity module from the support pages for your scanner
at www.xeroxscanners.com. Visioneer Acuity is a utility with advanced image processing options
to instantly improve the visual clarity of anything you scan.
1. In the list of installed programs select Visioneer Acuity Assets.
2. Click Yes when asked to confirm you want to remove the software.
Depending on the method of installation, and your scanner model, there may be multiple entries
for Visioneer Acuity in the installed programs list. The additional entries in this list are the image
processing libraries needed to support various scanner models. These additional items will be
called "Visioneer Acuity Assets" followed by a version number. In the scenario described here,
when you want to uninstall Visioneer Acuity make sure you select and uninstall Visioneer Acuity. If
you uninstall one of the entries labeled as an "asset" you will still need to uninstall the main
Visioneer Acuity utility.
®
Xerox DocuMate 3120 Specifications
Scanner Specifications
Document Requirements
Minimum Item Size
Maximum Item Size
Capacity
Paper Thickness
Plastic Card
General Specifications
Scanning Speeds
Optical Resolution
Output Bit Depth
Scan Method
Image Sensor
Light Source
Interface
Certifications
Operating Temperature
Relative Humidity
36
3 x 2 inches (76 x 51 mm)
8.5 x 38 inches (216 x 965 mm)
50 pages of 20lb printer paper (75–80 g/m
7–110 lbs. (28–400 g/m 2 )
Embossed cards up to 1.25 mm thick
20 pages per minute / 40 images per minute @ 200 dpi
600 dpi
24-bit color, 8-bit grayscale, 1-bit bitonal (black & white)
Duplex Automatic Document Feeder (ADF)
Dual CIS (Contact Image Sensor)
Dual RGB LED lamps
Hi-Speed USB 2.0, compatible with USB 1.1
UL, C-UL, FCC Class A, CE, CB, EAC(CU), USB-IF, WEEE, RoHS, E
50° ~ 95° F (10° ~ 35° C without condensation)
10% ~ 85% (@35° C without condensation)
Maintenance
2
)
S
NERGY TAR
User Guide