Connect The Power Cord - Xerox DocuMate 3120 User Manual

® ®
Xerox DocuMate 3120
4. Open the automatic document feeder cover and remove any tape or protective foam from
inside the feeder. Close the feeder cover when you are finished.

Connect the Power Cord

Note: Only use the power supply (DA-24C24 made by APD) included with your scanner.
Connecting any other type of power supply may damage your scanner, and will void its warranty.
1. Plug the power supply into the power port on the scanner.
2. Plug the power cord into the power supply and into a wall outlet.
6
Scanner Setup
User Guide