Disassembly; The Scooter Disassembled; Tiller Lock Knob (Locked); Tiller Lock Knob (Unlocked) - Pride Mobility Celebrity X Sport Owner's Manual

V I I I . D I S A S S E M B L Y

DISASSEMBLY

You can disassemble the scooter into seven pieces:
the seat, the front section, the rear section, the rear
shroud, the basket and the batteries. See figure 21.
No tools are required to disassemble or assemble
your scooter, but keep in mind that the disassembled
sections of the scooter take up more floor space
than the assembled unit. Always disassemble or
assemble your scooter on a level, dry surface with
sufficient room for you to work and move around
your scooter-about 2 metres (5 feet) in all directions.
Remember that some scooter components are heavy
and you may need assistance when lifting them.
WARNING! Avoid lifting weight
beyond your physical capability.
Ask for
necessary while disassembling
or assembling your scooter.
1. Place the scooter in drive mode by engaging the freewheel lever.
2. Lock the tiller in the straight ahead position by pushing the tiller lock knob in and turning it clockwise 90°. See
figure 22. The front wheel must face forward in order to lock the tiller.
3. Remove the seat by lifting it straight up and off of the scooter. If you encounter resistance when removing the
seat, disengage the seat rotation lever and swivel the seat back and forth while lifting up on the seat.
LOCKED POSITION
Figure 22. Tiller Lock Knob (Locked)
36
assistance when
www.pridemobility.com
A N D
REAR SECTION
FRONT SECTION
REAR SHROUD
Figure 21. The Scooter Disassembled
UNLOCKED POSITION
Figure 22A. Tiller Lock Knob (Unlocked)
A S S E M B L Y
SEAT
BATTERIES
BASKET
Celebrity X Sport