Splitscreen Controls - Raymarine a series Installation And Operation Instructions Manual

6.14 Splitscreen controls

When viewing a page with more than 1 application displayed you
can switch applications from the splitscreen view to fullscreen
view.
Example 1 — Splitscreen page
Example 2 — Fishfinder application expanded to Fullscreen
Selecting the active window — New a
Series and e7 / e7D
When viewing a splitscreen page you can select the active
application and view it fullscreen on a New a Series or e7 / e7D
by following the steps below.
With a page featuring multiple applications displayed:
1. Touch anywhere inside the application you want to make
active.
A border appears around the application, indicating that it
is active.
2. Select Menu.
3. Select Fullscreen to view the active application in fullscreen,
or
4. Select Splitscreen to return to the splitscreen view.
Selecting the active window — New c
Series and New e Series
When viewing a splitscreen page you can select the active
application and view it fullscreen on a New c Series or New e
Series (excluding e7 / e7D) by following the steps below.
With a page featuring multiple applications displayed:
1. Press the Switch Active Pane button.
The active pane pop up is displayed:
2. Press the Switch Active Pane button or use the Rotary
control to cycle the active application.
3. Press the Range in or Range out buttons to switch the
active application between splitscreen and fullscreen views.
Getting started
Selecting the active window — e7 / e7D
When viewing a splitscreen page you can select the active
application and view it fullscreen on an e7 / e7D with the touch
lock enabled by following the steps below.
With a page featuring multiple applications displayed:
1. Press the Menu button.
2. Select Cycle application.
Selecting cycle application cycles through the available
applications.
3. Select Fullscreen to view the active application in fullscreen,
or
4. Select Splitscreen to return to the splitscreen view.
Switching the active pane or display using
the keypad
The Switch Active button is used to switch the active pane on a
multi application page and / or to switch the active display.
With multiple displays connected and / or multiple application
page(s) displayed:
Cycle sequence
1
1. Press the Switch Active button to enter switch mode.
2. Use the Rotary control to cycle through the available panes
and / or displays.
The keypad will cycle through displays in the order in which
they were paired. On multi application pages the Range
buttons can be used to switch the active application between
full and splitscreen.
3. Press the Back button or the Switch Active button to exit
switch mode.
5
D12880-1
87