Intertek TASMAN EP & HP Installation And Operating Instructions Manual page 77

CONVERSION KIT MARKINGS
Class IIIA
Minimum inlet gas pressure 5.0" w.c. for natural gas
Minimum inlet gas pressure 11.5" w.c. for propane
Maximum inlet gas pressure 7.0" w.c. for natural gas
Maximum inlet gas pressure 14.0" w.c. for propane
Input rating 32,000/23,000 btu/hr for natural gas on Tasman HT unit
Input rating 18,000/12,500 btu/hr for natural gas on Tasman ET unit
Input rating 28,500/22,000 btu/hr for propane gas on Tasman HT unit
Input rating 15,000/12,500 btu/hr for propane gas on Tasman ET unit
Conversion kits part #TNG1 for NG & #TLPG1 for LPG are for use with models Tasman ET or
Tasman HT natural gas or propane gas.
Class IIIA
This appliance was converted d/m/y to _____ gas with kit #TNG1 or TLPG1 by (name and address of
organization making the conversion), which accepts the responsibility that this conversion has been
made properly.
Class IIIA
This control has been converted for use with ______ gas.
Exterior of the kit shall have the following markings:
1) Conversion kit part #
2) Appliance model #(s) for use with the kit
3) Type of gas to be converted to.
Page 77 of 80