Intertek TASMAN EP & HP Installation And Operating Instructions Manual page 45

MINERAL WOOL & EMBER INSTALLATION – PAN BURNER
Tasman HP
For illustration purposes logs are shown without center twig.
The Tasman HP is able to be operated with mineral wool & embers for additional flame effect. The
mineral wool is inserted between the logs and a containment barrier, which is part of the burner. The
other areas, shown along the front of the burner, may have other burner media such as embers or
"lava rock", etc. installed. There is a lip on the front of the burner, the burner media is placed
between this lip and the mineral wool barriers. Note: Only the mineral wool is to cover the burner
ports. Mineral wool may also be placed in the ember area if desired.
Page 45 of 80