Panasonic WJ-HD309A Network Operating Instructions page 15

Screenshot 3
The [Recording] button will be displayed in the [REC]
box.
About the recording mode and the priority
There are 4 recording modes. Each recording mode and priority is as follows.
Recording Mode
Emergency recording
Event recording
Manual recording
Schedule recording
*1: These priorities are the default settings. (Emergency recording is the highest priority.)
*2: It is possible to change the priority for manual recording, schedule recording and event recording. Refer to a sys-
tem administrator for further information.
When an emergency event occurs, perform recording manually using
an external switch, etc..
Perform recording manually at any event occurrence.
Start/stop recording manually.
It is possible to perform recording automatically at a scheduled time on
a designated day of a week.
Step 3
Start recording by clicking the [Recording] button.
• The REC indicator in the status display area will be
lit red when recording has started.
• Images from all cameras connected to this unit will
be recorded with the default settings.
• When images from cameras are currently recorded
with higher priority than manual recording, manual
recording will be suspended until that recording fin-
ishes.
Refer to the following for further information about
each recording mode.
Step 4
Click the [Stop recording] button to stop recording.
→ The REC indicator will go off.
Notes:
• The REC indicator will continue to be lit when
recording in the other recording mode even though
the [Stop recording] button is clicked.
• When a video input signal supply stops during man-
ual recording, recording will also stop automatically.
When the video input signal supply resumes, record-
ing will also resume automatically.
Description
*1
Priority
Highest
*2
1
*2
2
*2
3
15