Panasonic WJ-HD309A Network Operating Instructions page 30

Detection mode
The three detection modes are as follows.
Important:
Activating two or more detection modes simultaneously is not possible.
<ANY AREA mode>
An event action will be performed according to the settings when "motion" is detected in any of the set motion detec-
tion areas.
A
C
<VECTOR mode>
An event action will be performed according to the settings when an object moves within the set time to the other
detection areas in the set order.
The following is an example.
10 s
A
C
10 s
Motion is detected in area B within 10 seconds after being detected in area A.
Motion is detected in area C within 20 seconds after being detected in area B.
Motion is detected in area D within 10 seconds after being detected in area C.
When all of the above have occurred, an event action will be performed.
<DURATION mode>
An event action will be performed according to the settings when an object keeps on moving for the set period in the
detection area. For example, in case of the following settings; 10 sec. for areas A and B, 20 sec. for area C and 30
sec. for area D:
A
10 s
C
20 s
30
B
Any motion will be detected anywhere in the A, B, C, D areas.
D
B
D
An event action will be performed when an object keeps on moving for more than
B the set period in the specified detection area.
10 s
Important:
• When images to be searched are recorded with a low recording rate, the
D
DURATION mode may not work correctly.
30 s
• It may take time to search according to the contents of the recorded images.