Connect Network Via Adsl - EasyN F2 series User Manual

the IP Camera, for example: in picture 5 camera-1's IP is 192.168.1.126
（located in subnet 192.168.1） ，PC-1's IP is 192.168.0.100（located in
192.168.0） ，on this case, PC-1 can not access IP Camera-1, after changing
IP Camera-1's IP into 192.168.0.126, it can access;
2）computer and camera are in different LANs, but both of them can access
internet.
For camera-1 and computer-2 in picture 3, to access camera-1 through
computer-2, then need to set step 1）first to confirm computer-1 can access
camera-1, then configure router-1 （ router-1 should support port
forwarding）, then computer-2 can apply to access camera-1 via router-1.
Normally, computer-2 only can send message to router-1, so it can not
access camera-1 without configuration of router-1.

4.3. CONNECT NETWORK VIA ADSL

Connect device to computer via cable.
�
Configure device basic settings through IP Camera tool (details refer to:
�
IPcamera tool).
Login device as administrator, access PPPOE setting page to input account user
�
and password.
MF2E-E-B2
5.1
- 9 -