Email Service Settings; Motion Detection - EasyN F2 series User Manual

5.7. EMAIL SERVICE SETTINGS

Click to save
Picture 14- email service configuration
In picture 14, the configured content is must，if that information is not
correct，then the configuration is failed.
Notice: before configuring this page, please confirm the email
information is available.
� SMTP server: input the SMTP server of email server
Sender address:
�
�
Receiver address:
�
address. It can support 4 receivers.

5.8. MOTION DETECTION

Select motion detection to monitor a fixed area, it will trigger alarm
when there is abnormal situation. The configuration interface as picture
22，device can support 16 areas of motion detection，tick on option under
viewing window to enable the function of selected area. After enabling
the area，the screen will show a area frame and area number，click mouse
on the frame to drag to anywhere，also the frame size can be changed by
dragging the right-down corner of the frame. After configuration, click
apply button to enable the settings.
After save, click to test
input email address to send email
input email address to receive snapshots and IP
Input email server
Input sender email
Input receiver email
Login name
Login password
MF2E-E-B2
- 18 -