Ddns Settings - EasyN F2 series User Manual

To enable WIFI configuration referring to picture 11，click "Search"
button，then will pop up a page of searched wireless network，select the
right wireless network，then all parameter of the wireless network will
auto write into the parameter blanks such as shown in picture 11（such
as SSID, encryption, etc.）
configuration，click "Save & restart" button;
Notice: the wireless function should be enabled on wired condition

5.6. DDNS SETTINGS

In picture 3，router-1 acquire external IP address through ADSL，and the
IP address is dynamic，when we want to access device from internet，we
do not know what is the IP address，hence，we should acquire the address
via dynamic domain name server in internet，the camera-1 send a message
to dynamic domain name server(ddns) from time to time，then the ddns can
analyze the external IP address of the router-1 camera-1 connected，we
can acquire the IP address of the server through dynamic domain name.
Actually，the dynamic domain name stands for dynamic IP address，if we
can not access device through IP address, the dynamic domain name is not
available.
� � � � MANUFACTURER
MANUFACTURER MANUFACTURER
MANUFACTURER DDNS
The manufacturer has set up ddns in internet，and provide a dynamic domain name for
each device，and the settings has been done when the device produced，such as shown
in picture 13. After set remote configuration，input the dynamic domain name in
browser address blank, then the address will be analyzed as the right IP address
of device，and start to connect device.
，then input password and check it is ok.
Picture 12- WIFI configuration
DDNS DDNS
DDNS
MF2E-E-B2
After
- 16 -