Network Connection; Connection Instruction; Access Instruction - EasyN F2 series User Manual

SD card: support 32G SD memory card
I/O interface: 1 channel alarm input, connect 3 and 4 interfaces（ground,
trigger by low electric level） ；TTL to control output, connect 1 and 2
interfaces（1，2 short connection）.
4. 4. 4. 4. NETWORK NETWORK NETWORK

NETWORK CONNECTION

4.1. CONNECTION INSTRUCTION

Before access IP Camera, first to confirm the network connection and the
power supply, to check if the status lens normal. For connection as picture
3:
1）camera-1 and camera-2 is connected to two different LANs
2）the two LANs must connect to internet and have routers connecting
through ADSL or optical fiber, etc.
3）computer-3 should be a device connecting to internet

4.2. ACCESS INSTRUCTION

For accessing camera, in addition to communication links remain open, it
also requires a simple settings for camera and network:
1）computer and camera are in the same LAN
For access IP Camera via LAN, it should be confirmed that the computer
and camera in the same subnet, if they are not, then need to configure
CONNECTION CONNECTION
CONNECTION
P P P P icture icture icture icture 3- 3- 3- 3- network network connection network network connection scheme connection connection scheme scheme scheme
MF2E-E-B2
- 8 -