Connection Of Network Cable And Power Adpter; Connect Ip Camera To Router/Switch/Hub With Network Cable - EasyN H Series User Manual

2.Connect the IP Camera to the computer Directly

4.1.Connection of network cable and power adpter

Step 1:Connect the crystal head of network cable to RJ45 interface of IP camera
Step 2:Connect the power adpter to ip camera and power on

4.2.Connect IP camera to router/switch/hub with network cable

Connect the other side of the network cable to Ethernet switch ,router or IP sharing device.
Warning :Make sure use the attached power adapter,
unauthorized ones may damage the IP camera.
Check whether the mains voltage(110V or 220v) and
frequency(50x or 60x) of your location is matched
with the description of the label on the power
adapter ,if not ,don't use it !
We never stop trying!
9