Connect Network Via Router; Software Operation; Ipcamera Tool - EasyN F2 series User Manual

Meanwhile to enable DDNS server function then click < < < < set
�
device.(details refer to:
Connect device to internet via ADSL, then it can be accessed via ddns through
�
WAN.

4.4. CONNECT NETWORK VIA ROUTER

5. 5. 5. 5. SOFTWARE SOFTWARE SOFTWARE

SOFTWARE OPERATION

5.1. IPcamera TOOL

In picture 3, camera-1's IP is not in the same subnet with computer-1, it can not
be accessed, to run Devfind.exe
searched IP Camera, then we can configure the settings, interface as picture 4.
5.6 ddns settings)
OPERATION OPERATION
OPERATION
1) 1) 1) 1) Connect device to LAN through cable
2) 2) 2) 2) Configure device through IPcam tool.
(Details refer to:
3) 3) 3) 3) Access device as administrator.
4) 4) 4) 4) Access ddns setting page to enable DDNS
service then click < < < < set
(Details refer to:
5) 5) 5) 5) Then it can be accessed through internet.
in CD, click search button then click-on
MF2E-E-B2
set> > > > to restart
set set
5.1 IPcamera tool)
set> > > > to restart device.
set set
5.6 ddns settings)
- 10 -