Emptying The Bin; Cleaning The Pre Motor Filters; Cleaning The Exhaust Filter - Hoover Vacuum cleaner User Manual

EmPTYing THE Bin

1 To remove the bin from the cleaner press the
bin release button.
Hold the container over
2
the Bin and press the
easy open button at the
rear of the container.
The bin door will open
and you can empty into a
bin with no dust contact.
Once emptied, gently tap
4 3
or shake the container to
release any excess dust
from the filters.
Do not overfill the bin
above the max level line.

CLEaning THE PrE mOTOr FiLTErS

1
Rotate the upper part of the dust bin to open.
Remove the mesh frame from the
3
HEPA filter, then gently tap both filters
to release any excess dust.
!
imPOrTanT! Ensure the mesh frame is
reassembled to the HEPA filter before use

CLEaning THE EXHaUST FiLTEr

The exhaust filter should be washed every month.
Press down on the latch to remove the exhaust grille.
Remove filter and wash with warm water.
Remove excess water by shaking and leave to dry for
24 hours. Refit filters only when completely dry.
- 6 -
2 Remove the filter assembly from the bin top by
rotating the filter. It is advisable to wash the filters
after every 5 bin empties.
4 Wash both filter and protective mesh under warm
water until the water runs clean. Remove excess
water by shaking and leave to dry for 24 hours.
Reassemble and refit filters to cleaner, only when
they are completely dry.