Emptying The Bin; Cleaning The Pre Motor Filters; Cleaning The Exhaust Filter - Hoover velocity User Manual

EMPTYing THE Bin

!
iMPOrTanT: Before emptying the bin, make
sure vacuum cleaner has been switched off.
1
To remove the bin from the cleaner press the
bin release button.
Hold the container over
2
the Bin and press the
easy open button.
The bin door will open
and you can empty into a
bin with no dust contact.
Once emptied, gently tap
4 3
or shake the container to
release any excess dust.
Do not overfill the bin
above the max level line.

CLEaning THE PrE MOTOr FiLTErS

1
Rotate the upper part of the dust bin to open.
Gently tap both filters to release
3
any excess dust.
!
IMPORTANT! Ensure the pre-motor filter and
<40
exhaust filters are reassembled to the cleaner before use.

CLEaning THE EXHaUST FiLTEr

The exhaust filter should be washed every month.
Remove the exhaust filter from your cleaner and wash
with lukewarm water.
Remove excess water by shaking and leave to dry for
24 hours. Refit filters only when completely dry.
- 6 -
2 Take out the pre-motor filter.
Wash both filter and sponge under warm water until
4
the water runs clean. Remove excess water by
shaking and leave to dry for 24 hours. Reassemble
and refit filters to cleaner, only when they are
completely dry.
<40
gB