Power Switch - Hoover Vacuum cleaner User Manual

PrEParing YOUr CLEanEr
Insert the main handle in the cleaner body
and then fix it with the screw provided.
To tighten the screw you can use a
standard coin.
SUPPLY COrD
Do not run over the supply
cord.
Clip the supply cord in the cord
clip at the back of the handle
to avoid accidentally running
the cleaner over the cord and
causing any damage.
CarPET CarE COnTrOL SELECTOr
The carpet care control selector raises and lowers
the height of the nozzle.
5
4
3
* Certain models only
CarPET CarE COnTrOL SELECTOr
Ensure that the cleaner is in the upright (parked)
position and move the selector to the required
setting for the carpet type or floor covering.
To obtain the best performance and energy
#1
efficiency it is recommended that the adjustment
setting position 1 is used for the main cleaning
operations. The other adjustment settings are
for ease of use, use on longer pile carpets, or for
specialist cleaning tasks.
Settings
1. Best performance and energy efficiency, short to
medium pile carpets, hard wooden floors, wooden
floor boards with crevices, ceramic tiles.
2. Medium pile carpets, delicate floor coverings
such as vinyl or linoleum, parquet flooring.
3 or 4. For longer pile carpets the motion
resistance may increase. Use these intermediate
settings to reduce the force required to push the
vacuum cleaner.
5. Luxury carpet and Tool mode
imPOrTanT: Using this cleaner for loop pile
carpets with pile greater than 30mm is not
recommended. Please consult the floorcare/carpet
manufacturer's recommended cleaning instruction
before vacuuming.
imPOrTanT: When cleaning delicate hard floors
such as vinyl or linoleum the selector switch must
be moved to position 2. Failure to do so may cause
damage to the floor surface.
This vacuum cleaner is supplied with an Energy
Label as required by European Regulation (EU)
665/2013. If the label shows a red prohibition
circle on the right covering the hard floor symbol,
then this indicates that the vacuum cleaner is not
suitable for use on hard floors.
1
#1
nOTE: Dust pick up ability carpet, dust pick up
2
ability hard floor, and energy efficiency in accord
with Commission Regulations (EU) 665/2013 and
(EU) 666/2013.
CLEanEr rELEaSE

POWEr SWiTCH

- 4 -
Unlock the cleaner by pressing down on the left pedal
with your foot.
To switch the cleaner on or off press down on the right
pedal with your foot.