Table of Contents
Advertisement
CarPET CarE COnTrOL SELECTOr
The carpet care control selector raises and lowers
the height of the nozzle.
5
4
Ensure that the cleaner is in the upright (parked)
position and move the selector to the required
setting for the carpet type or floor covering.
To obtain the best performance and energy
#1
efficiency
it is recommended that the adjustment
setting position 1 is used for the main cleaning
operations. The other adjustment settings are
for ease of use, use on longer pile carpets, or for
specialist cleaning tasks.
Settings
1. Best performance and energy efficiency, short to
medium pile carpets, hard wooden floors, wooden
floor boards with crevices, ceramic tiles.
2. Medium pile carpets, delicate floor coverings
such as vinyl or linoleum, parquet flooring.
3 or 4. For longer pile carpets the motion
resistance may increase. Use these intermediate
settings to reduce the force required to push the
vacuum cleaner.
5. Luxury carpet and Tool mode
imPOrTanT: Using this cleaner for loop pile
carpets with pile greater than 30mm is not
recommended. Please consult the floorcare/carpet
manufacturer's recommended cleaning instruction
before vacuuming.
imPOrTanT: When cleaning delicate hard floors
such as vinyl or linoleum the selector switch must
* Certain models only.
48011580-01 Turbopower IM UK.indd 5
CarPET CarE COnTrOL SELECTOr
be moved to position 2. Failure to do so may
cause damage to the floor surface.
This vacuum cleaner is supplied with an Energy
Label as required by European Regulation (EU)
665/2013. If the label shows a red prohibition
circle on the right covering the hard floor symbol,
1
then this indicates that the vacuum cleaner is not
suitable for use on hard floors.
2
3
#1
nOTE: Dust pick up ability carpet, dust pick up
ability hard floor, and energy efficiency in accord
with Commission Regulations (EU) 665/2013
and (EU) 666/2013.
CLEanEr rELEaSE
Unlock the cleaner by pressing down on the pedal
with your foot.
- 5 -
POWEr SWiTCH
To switch the cleaner on or off press down on the
pedal with your foot.
CLEanEr STOragE
Turn the cleaner off and remove the plug. Wrap the
cord around the cord storage hooks.
For quick release of the full length of the power cord,
rotate the top storage hook.
2014/6/5 17:36:46
Advertisement
Table of Contents
