Planet FGSW-4840S User Manual page 28

The Tag VLAN setting page is affected by the global setting of the ports, the screen in Figure 3-26 appears. It contains the
following fields:
Object Description
VLAN
The VLAN number. Select the number of the VLAN you want to configure here.
VLAN ID
Configure the VLAN ID.
Port
The switch port number.
Select the member of the VLAN here. If this field is checked, it indicates the port belongs to the
Member
current VLAN.
Egress Frame
The solution to the egress frame. "Drop Tag" indicates drop the tag header before sending the frame.
"Add Tag" indicates add the tag header before sending the frame. "Unmodify" indicates do not
modify the tag header before sending the frame.
All Ports
By operating on this field expediently, you can set the values of all ports in the corresponding field.
ALL VLAN
Displays all defined VLANs.
Select All
Select all ports to be the VLAN members.
Clean Up
Clean up all members of the VLAN.
Submit
Submit to buildup a VLAN with the selected members.
If any Trunk has been set, the Trunk can be configured, but member ports of the Trunk is not
Note
:
able to be configured and in the field it display the parameters of the Trunk they belong to.
Figure 3-26 Tag VLAN Setting screen
User's Manual of FGSW-4840S
24