Port Vlan Setting - Planet FGSW-4840S User Manual

3.7.1 Port VLAN Setting

The page displays when the switch is in Port VLAN mode, the screen in Figure 3-24 appears.it contains the following fields:
Object Description
VLAN
The VLAN number. Select the number of the VLAN you want to configure here.
Port
The switch port number.
Select the member of the VLAN here. If this field is checked, it indicates the port belongs to the
Member
current VLAN.
Member Description Displays the user-defined port description.
ALL VLAN
Displays all defined VLANs.
Select All
Select all ports to be the VLAN members.
Clean Up
Clean up all members of the VLAN.
Submit
Submit to buildup a VLAN with the selected members.
1. If any Trunk has been set, the Trunk can be configured as a VLAN member and member
Note
:
ports of the Trunk is not able to be configured.
2. For the first time the Port VLAN mode is set, a default VLAN, which is indexed as NO.1
and contains all switch ports.
Figure 3-24 Port VLAN Setting screen
User's Manual of FGSW-4840S
22