Options Panel; Launch Timeout; Replace Timeout; Restart Timeout - Honeywell VX3Plus Reference Manual

Options Panel

AppLock contains several types of delays and timeouts to accommodate different applications. Please note that the delays
specified on the Launch panel are delays before AppLock attempts to start the specified application(s). The timeouts specified
on this panel are delays after AppLock has attempted to launch the application.

Launch timeout

This timeout specifies the period of time for AppLock to wait for the application to initially launch after the application has been
called. For example, if the application takes time to launch and then initialize before a display window is created, use this delay
to specify the delay period.

Replace timeout

This timeout specifies the period of time for AppLock to wait after an initial screen (like a password prompt screen) is replaced
by another application window.

Restart timeout

This specifies the period of time for AppLock to wait for an application to restart. If the application fails to restart automatically,
AppLock then proceeds according to the options selected when the application was configured on the Application and Launch
panels.

Status Panel

Use the Status panel to view the log of previous AppLock operations and to configure which messages are to be recorded
during AppLock operation.
Status information is stored in a specific location on the storage device and in a specific logfile specified by the Administrator.
For this reason, the administrator can configure the type of status information that is logged, as well as clear the status
information.
3-46