Honeywell VX3Plus Reference Manual page 92

Message
Exit verify password-no
pwd set
Exit verify password-
response from dialog
Found taskbar
Getting address of key-
board hook init pro-
cedure
Getting configuration
from registry
Getting encrypt pwd
length
Hook wndproc failure
Hook wndproc of open
app failure
Hot key event creation
failure
Hot key pressed
Hot key pressed
Hot key set event failure
Hotkey press message
received
In app hook:WM_SIZE
In app hook:WM_WIN-
DOWPOSCHANGED
Initializing keyboard
hook procedure
Keyboard hook initial-
ization failure
Keyboard hook loaded
OK
L after Ctrl
Loading keyboard hook
Open failure
Open registry failure
3-52
Explanation and/or corrective action
Exiting password verification.
Exiting password verification.
The handle to the taskbar has been found so that AppLock can disable it in user mode.
AppLock is retrieving the address of the keyboard hook.
The AppLock configuration is being read from the registry. This occurs at initialization and
also at entry into user mode. The registry must be re-read at entry into user mode in case
the administration changed the settings of the application being controlled.
The length of the encrypted password is being calculated.
AppLock is unable to lock the application. This could happen if the application being
locked encountered an error after performing its initialization and shut itself down prior to
being locked by AppLock.
The application is open, but AppLock cannot lock it.
The Admin applet is unable to create the hotkey notification.
Processing the hotkey and backdoor entry
Processing the hotkey and backdoor entry
When the administrator changes the hotkey configuration the hotkey controller must be
notified. This notification failed.
The user just pressed the configured hotkey.
In addition to preventing the locked application from exiting, AppLock must also prevent
the application from enabling the taskbar and resizing the application's window. This mes-
sage traps a change in the window size and corrects it.
In addition to preventing the locked application from exiting, AppLock must also prevent
the application from enabling the taskbar and resizing the application's window. This mes-
sage traps a change in the window position and corrects it.
AppLock is calling the keyboard hook initialization.
The keyboard filter initialization failed.
The keyboard hook dll exists and loaded successfully.
Processing the backdoor entry.
When AppLock first loads, it loads a dll that contains the keyboard hook processing. This
message is logged prior to the load attempt.
The status information is being saved to a file and the file open has failed. This could
occur if the file is write protected. If the file does not exist, it is created.
If the Administration registry key does not exist, the switch to user mode fails because the
Level
LOG_PROC-
ESSING
LOG_PROC-
ESSING
LOG_PROC-
ESSING
LOG_PROC-
ESSING
LOG_PROC-
ESSING
LOG_EX
LOG_ERROR
LOG_ERROR
LOG_ERROR
LOG_EX
LOG_EX
LOG_ERROR
LOG_PROC-
ESSING
LOG_EX
LOG_EX
LOG_PROC-
ESSING
LOG_ERROR
LOG_EX
LOG_EX
LOG_PROC-
ESSING
LOG_ERROR
LOG_ERROR