Condenser; Ti-C Condenser Turret (System Condenser) - Nikon eclipse Ti-U/B Instructions Manual

1.6

Condenser

1.6.1

TI-C Condenser Turret (System Condenser)

The TI-C Condenser Turret allows you to attach various optical elements to a turret and select them as
necessary for different microscopy methods. This type of condenser is referred to as a "system condenser".
System Condenser (Mounted on TI-DH Dia Pillar Illuminator 100W)
Condenser focus knob
Condenser centering knob
Aperture diaphragm
open/close lever
Condenser turret
Condenser lens
(4 types: ELWD, LWD,
HMC, and CLWD)
System Condenser (Mounted on TI-DS Dia Pillar Illuminator 30W)
Condenser holder
Aperture diaphragm
open/close lever
Condenser turret
Condenser lens
(for HMC only)
Chapter 1 Part Names
Figure 1-19 TI-C Condenser Turret
(mounted on TI-DH Dia Pillar Illuminator 100W)
Figure 1-20 TI-C Condenser Turret
(mounted on TI-DS Dia Pillar Illuminator 30W)
* The system condenser can be mounted on the TI-DS Dia Pillar Illuminator 30W for HMC observation only.
1.6 Condenser
20
Condenser focus knob
Condenser cassettes
(Ph condenser cassettes have
phase contrast ring centering
screws on the sides.)
Condenser cassette clamp screws
(both sides of cassette)
Condenser cassettes
Condenser cassette clamp screws
(both sides of cassette)