Ti-S, Ti-S/L100 - Nikon eclipse Ti-U/B Instructions Manual

1.1.2

Ti-S, Ti-S/L100

The illustrations below show the Ti-S microscope body with the following accessories:
TI-DS Dia Pillar Illuminator 30W, ELWD-S Condenser, TE-PS30 30W Power Supply, TI-SR Rectangular
Mechanical Stage, TI-T-B Eyepiece Base Unit, TI-TS Eyepiece Tube B, CFI 10x eyepieces, TI-N6
Sextuple Nosepiece, objectives, etc.
Condenser holder
Condenser turret (Fig.: ELWD-S)
Condenser lens
Eyepieces (both sides)
Eyepiece tube (Fig.: TI-TS)
Eyepiece base unit
(Fig.: TI-T-B)
Power supply device
(Fig.: TI-PS30W)
Main body (Fig.: Ti-S)
Optical path selector knob
Left side port*
Chapter 1 Part Names
1.1 Microscope Configuration
Figure 1-3 Ti-S
Focus knob
(Coarse/Fine)
Figure 1-4 Ti-S (Left View)
* Attach a protective cap on the side port when the side port is not in use.
13
Lamphouse
Filter sliders
Field diaphragm slider
Dustproof slider
Dia pillar illuminator (Fig.: TI-DS)
Objectives
Stage ring (concentric ring)
Stage (Fig.: TI-SR)
Nosepiece (Fig.: TI-N6)
Stage knob
Focus knob (Coarse/Fine)
Dia illumination ON/OFF switch
Dia illumination brightness
ON
OFF
6V30 W control knob
12V1 00W
MAX.
Torque adjustment ring
for coarse focus knob