THOMSON 716 User Manual page 54

Chapter 3
Internet Connectivity Dial-In Clients
Starting a broadband
Internet session
Terminating a
broadband Internet
46
Proceed as follows:
Click the Internet Connect dockling.
1
If the Internet Connect dockling is not available, go to the Applications
folder on the system startup disk and double-click Internet Connect.
The following window appears.
2
Make sure Built-in Ethernet is selected in the Configuration list.
If needed, enter user name and password for your user account at the Service
3
Provider.
Click Connect.
4
As soon as the connection is established you can open your web browser and
5
surf the Internet.
Proceed as follows:
Click the Internet Connect dockling.
1
session
If the Internet Connect dockling is not available, go to the Applications
folder on the system startup disk and double-click Internet Connect.
The following window appears.
2
Make sure Built-in Ethernet is selected in the Configuration list
Click Disconnect.
3
The connection is released. As a result no Internet connectivity exists any
4
more.
E-DOC-CTC-20050803-0002 v2.0