Edision OPTIMUSS OS1 User Manual page 55

save it as a recording or any time there timeshift. Should then start the 6th event, is the oldest image is
deleted.
3. Permanent timeshift Max Length
: Here you can adjust how many minutes a timeshift recording can be up to each event. This should
be set very high and only serves as a safety measure, lest the hard disk will be completely full. Max
Length should be reached, the time shift recording is restarted and started a new event. Makes sure that
you have enough space on the disk for "Events Max Length".
4. Permanent Timeshift Start Delay
: The "Start delay" can you set how many seconds after changing channels or broadcast is scheduled
to begin the time shift recording. So you also have time to zap the zapping and this unnecessarily slows
down immediately if a timeshift recording is started, I would recommend you here a value of about 10s.
Then, after you've zapped 10s, started the timeshift recording.
5. Timeshift-Save on Action zap
: Should you wish to have the Instant record menu, the "current event timeshift" marked for recording
and zap before the end of the event, so you can set here what to do with the incomplete shift recording.
- Ask User: Then comes a popup which asks you what to do.
- Save and stop: Then, the current picture is being stored to date.
- Save and record: Then, save the current recording to date and then automatically start recording
an Instant Record.
- Do not save: Then the recording will not be saved.
6. Stop time shift while recording?
: If this is enabled it to disable timeshift automatically once started on the transmitter to her just
watching a recording (or instant timer record) is. This saves resources because not run two shots at once
(timeshift and timer), and is particularly interesting for Optimuss OS boxes that are so overwhelmed
sometimes turn 2 HD footage simultaneously and the recording is broken.
7. Show PTS Infobar while timeshifting?
If you activate this the normal play / pause / stop icon on the TV replaced by another display where
you can see, for example, a progress bar and also comfortable with the> <button to jump back and forth
can.
1. Permanent timeshift Enable
: With this you can activate or deactivate the
permanent timeshift..
2. Permanent timeshift Max Events
: Here you can set how many events on the
current channel is recorded. Should you here for
example have set up 5, so always be the last 5
events stored on this channel and this you can then
- 55 -
Optimuss OS User's Manual