Edision OPTIMUSS OS1 User Manual page 49

- Use a gateway
: Set this option to "yes" and enter the IP address of the PC or router in your network with internet
connectivity. Usually this is: 192.168.0.1
To save the settings and activate the network connection press the OK button.
• Nameserver setting
Note: If you have set the "Use DHCP" option to "yes" you won't have to enter anything here since
this will be done automatically.
a seconds name server and the Yellow options utton to delete a name sever.
• Network test
item and press the OK button.
• Restart network
: Reboots the network configuration of your Optimuss OS.
• Network Wizard
: The network wizard will assist you with the setup of you network.
B. Mounts Setup
• Mount again
: Attempt to recover lost mounts (in background).
• Mount Manager
: Assuming you can see your 4D on the network ignore the shares you already have on your
windows system and do this.
- Nameserver
: Enter the DNS-Server's IP address of your LAN
here. DNS is used to translate a Domain name to
an IP address. Normally, if the Type is set to LAN,
there is no need for a DNS entry. If the Optimuss
OS is connected to the Internet over a router, enter
the router's IP address here.
Press the Green options button if you want to add
The network test will assist you in finding possible
sources of error in your network configuration.
Press the Green options button to start the test or
to repeat it. Press the Yellow options button to
abort the test.
Once the test has finished you can get additional
information and help to every subitem of the test.
Use the navigation buttons up/down to select and
- 49 -
Optimuss OS User's Manual