Edision OPTIMUSS OS1 User Manual page 34

Switch to the service which recording you want to stop.
(
Press the Record
If you only have one active recording it will be stopped immediately.
If more than one recording is active you will given the choice which recording you want to stop.
14-3. Recording by Timer
With the help of a timer you can record shows (if you have a hard disk installed). You are offered two
different ways to program a timer, the manual way of via the EPG.
If no OSD menu is visible on your screen, press Menu and select "Timers" on the menu.
and X mark will appear.
NOTE : if you want to enable the disabled timer, press YELLOW again.
- Blue (Cleanup)
: This option is used to remove those finished timers from the Timer List.
- OK (Edit)
: This option is used to edit a timer.
The status of a timer is shown on the right side:
- Waiting means: still coming up
- recording means: recording right now
- done means: recording finished
- the red X indicates that a timer was deactivated
NOTE : Your Optimuss OS will be turned on 5 minutes before the recording if a recording is supposed
to start while the Optimuss OS is in Deep-Standby mode.
Manual programming
Press the Green options button to add a new timer.
1. Name : Displays the name of the selected program.
2. Description : Displays a short description of the selected program.
)
button, select the "Stop recording" option and press the OK button to select.
In this menu, color keys are assigned for each
different function.
- Red (Delete)
: This option is used to delete a timer.
- Green (Add)
: This option is used to add a timer.
- YELLOW (Disable)
: This option is used to disable the timer
- 34 -
Optimuss OS User's Manual