Desk Leveling And Height Adjustment - LifeSpan Workplace DT-3 Owner's Manual

Treadmill/bike desks
Hide thumbs Also See for Workplace DT-3:
Table of Contents

Advertisement

DT-5 Desk:
Assembly Instructions
Step 4: Attach the Wire Cover to the Right Extension Tube
A. Simply snap the cover (11) over the right extension tube (B). The
bottom of the cover will be resting on top of the stop bumper (D).
Safety Key
When using the DT-5 with a treadmill use safety key (F). When using the
DT-5 with a bike please use safety key (E).
F
12
11
B
D
E
DT-5 Desk:

Desk Leveling and Height Adjustment

Desk Leveling
The desk needs to be leveled prior
to use. The desk comes with two
adjustable feet that can be used
to level the desk and eliminate
rocking. If the desk is rocking on
two of the feet, adjust the two front
feet until all four feet are sitting
securely on the floor.
Desk Height Adjustment
CAUTION: Remove all objects from the desktop prior to making
!
height adjustments. We recommend using two people for the
height adjustment.
A. Loosen the adjustment knobs
(A) on each upright by turning it
no more than two turns counter-
clockwise.
B. While firmly holding each side of
the desktop, pull both adjustment
knobs out and slowly raise or
lower the desktop.
C. Release the adjustment knob as
the desired level is reached. The
adjustment knob will click into
place.
D. Check to make sure the desk
height is set at the same level on
both sides. Turn the adjustment
knobs clockwise to lock in place.
Desk Adjustment Feet
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workplace dt-5Workplace dt-7

Table of Contents