Personal Settings - LifeSpan Workplace DT-3 Owner's Manual

Treadmill Desk Personal Settings
To enter Personal Settings mode, press and hold the Stop/Pause button
simultaneously with the button. After three seconds, F001 should
show in the display.
1. To change between English and Metric mode, press the
until F014 shows in the display. Press enter and either EN or SI
will then appear in the display. To change to EN (miles) press the
button. To change to SI (kilometers) press the
and remove and re-install the safety key.
2. To turn the Intelli-Guard feature on or off, press the
F012 shows up in the display. Press enter so on/off appears in the
display. Press the button to turn Intelli-Guard off, or press the
button to turn Intelli-Guard on. Press enter and remove and re-install
the safety key.
3. To turn the Audible Alert on or off, press the
shows in the display. Press enter so on/off appears in the display.
Press the button to turn the audible alert off or press the
to turn the audible alert on. Press enter and remove and re-install
the safety key.
WARNING – The audible alert is turned on from the
manufacturer to warn the user that the treadmill desk is
!
starting or the speed is changing. Turning this alert off is done
at the sole discretion of the user.
4. To change the allowable maximum speed from 4 mph (6.4 kph) to
2 mph (3.2 kph), press the
Press enter and 4.00 will show by default. Press the
2.00 will be displayed. Press enter and remove and re-install the
safety key.
32
button
button. Press enter
button until
button until F015
button until F018 appears in the display.
button and
5. To start the treadmill at the speed it was going prior to pressing the
pause button, press the
Press enter and by default the display shows "0". Press the
to display a "1" and press enter. Remove and re-install the safety key.
6. To find the running total distance you have walked, press the
button until F016 shows in the display. Press enter and the total
distance will be displayed.
7. To find the total hours the treadmill desk has run, press the
button until F017 shows in the display. Press enter and the total
hours will be displayed.
button NOTE: Depending on the firmware the console has will
determine if all of the options listed above will be available.
LifeSpan reserves the right to make changes and improvements
to our products without incurring any obligations to similarly
alter any product purchased.
Treadmill Desk Personal Settings
button until F019 appears in the display.
button
or
or
33