Table Of Contents; Introduction - Jackson Systems Comfort System T-32-P Installation Manual

INTRODUCTION

This manual should not be left with the owner
as it contains installer setup functions which, if
not correctly set, may cause damage to the
HVAC equipment or seriously affect
performance.
The T-32-P thermostat is intuitive, reliable and
easy to install. Using a common sense approach
to the installation will ensure this product is
installed properly and to the customer's
satisfaction. Please take time to read and
understand this manual so that installation and
testing is undertaken in an efficient manner.
This manual is to be used in conjunction with the
supplied User Manual.
Although great care has been taken in the
preparation of this manual, Jackson Systems
takes no responsibility for errors or omissions
contained herein. It is the responsibility of the
installer to ensure that this thermostat and the
equipment connected to it operate in a safe
and efficient manner.
Due to ongoing product improvements, Jackson
Systems reserves the right to change the
specifications of the T-32-P thermostat or its
components without notice.
All rights reserved.
© Jackson Systems, LLC 2009.
Intellectual rights apply.
5418 Elmwood Avenue
Indianapolis, Indiana 46203
888-652-9663
www.jacksonsystems.com

TABLE OF CONTENTS

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installing the thermostat . . . . . . . . . . . . . . . . . . . 3
Disassembly . . . . . . . . . . . . . . . . . . . . . . 3
Thermostat location . . . . . . . . . . . . . . . . . 3
Mounting the subbase . . . . . . . . . . . . . . . 3
Terminal designations . . . . . . . . . . . . . . . 4
Typical system wiring diagram. . . . . . . . . . . . . . . 4
Heat only . . . . . . . . . . . . . . . . . . . . . . . . . 4
1 heat / 1 cool . . . . . . . . . . . . . . . . . . . . . 4
2 heat / 2 cool . . . . . . . . . . . . . . . . . . . . . 4
2 heat / 1 cool heat pump . . . . . . . . . . . . 5
3 heat / 2 cool heat pump . . . . . . . . . . . . 5
2 heat / 1 cool dual fuel . . . . . . . . . . . . . . 5
3 heat / 2 cool dual fuel . . . . . . . . . . . . . . 5
Special instructions for dual fuel applications . . . 6
Activating the battery . . . . . . . . . . . . . . . . . . . . . . 6
Setting the system switches . . . . . . . . . . . . . . . . 6
System switch functions . . . . . . . . . . . . . . . . . . . 6
Factory default settings . . . . . . . . . . . . . . . . . . . . 6
Entering the advanced installer settings menu . . 7
Advanced installer settings menu . . . . . . . . . . . . 7
TT terminal functions . . . . . . . . . . . . . . . . . . . . . . 8
Remote sensors. . . . . . . . . . . . . . . . . . . . 8
Outdoor sensor wiring . . . . . . . . . . . . . . . 8
Indoor sensor wiring . . . . . . . . . . . . . . . . 9
Using multiple sensors for
temperature averaging. . . . . . . . . . . . . . . 9
Remote ON/OFF or override . . . . . . . . . . 9
Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Testing fan operation . . . . . . . . . . . . . . . 10
Testing conventional heating
and cooling operation . . . . . . . . . . . . . . 10
Testing heat pump operation . . . . . . . . . 10
Resetting the time delays . . . . . . . . . . . 10
Factory Test Mode . . . . . . . . . . . . . . . . . 10
Adaptive Recovery . . . . . . . . . . . . . . . . . . . . . . 10
Basic trouble shooting . . . . . . . . . . . . . . . . . . . . 10
Remote sensor installation instructions . . . . . . . 11
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2