Fan Removal - Yunca Gas LEEDZ Installation & Operation Manual

MAINTENANCE
(cont).
HOW TO REMOVE FAN
NOTE: Disconnect Main Power first
1. Remove front cover.
2. Disconnect the wiring from switch.
3. The earth wire must be unplugged and the plastic conduit adaptor removed from its retaining
bracket.
4. Disconnect earth wire from control valve bracket.
5. Unplug white connector block.
6. Slacken the four screws that attach the fan mounting bracket to the base.
7. Remove fan.
Revised 04-08-10 YUNCA Leedz FS Fuzzy Feb 2010 Page 14 of 19