Content 1. Features 2. Specifications 2.1 Overview 2.2 Temperature range and humidity 2.3 Noise level 2.4 Line voltage and protective functions 2.5 Safety and EMC certificates 3. Parts and accessory 4. The modular system of the SilentStorm CM PSUs 4.1 The connectors at the PSU 4.2 The modular cables 5.
Dear customer! Congratulations for purchasing one premium quality SHARKOON product. For a long life time and to take full advantage of this product we recommend that you read this manual completely. Have a good time with our product! SHARKOON Technologies GmbH 1.
2. Specifications 2.1 Overview Model No. SHA460-135A Input voltage Current Frequency Input (AC) 220 - 240 V ~ 3.5 – 3 A 50 Hz Output (DC) +3.3 V +5 V +12 V +12 V +12 V +12 V -12 V +5 V Max.
To prevent the risk of electric shock, do not open power supply housing. No user-exchangeable parts inside. For service and maintenance refer to authorized SHARKOON personnel. Warranty is void under unauthorized attempt to open the po- wer supply housing. Suitable for indoor or office use only.
2.4 Line voltage and protective functions This PSU works with 230 V and 50 Hz and is equipped with the following protective functions: 1. Over voltage protection: The power supply provides a latch mode against over voltage, as defined below: Min.
3x SATA (15-pin / c) 1x Cable adapter (4-pin peripheral > Floppy / d) Note: If you are missing any of the items listed above, please contact customer service via e-mail at support@sharkoon.com or call: + 49 (0) 6403 – 775 6100. SILENTSTORM CM...
4. The modular system of the SilentStorm CM PSUs The special feature of these PSUs is the so called cable management system to connect the peripheral devices. Thanks to this modular system only the really required cables need to be connected thus keeping your case proper and optimizing the airflow within.
5.2 Connecting the PC components to the PSU 5.2.1 The connectors at a glance Connector 460 W 560 W 660 W 1x attached 1x attached 1x attached 20+4-pin ATX power connector 1x attached 1x attached 1x attached 4+4-pin P8 power connector 2x modular 2x modular 2x modular...
Do not force to plug the female connector into the male connector in wrong orientation, nor modify any of the components, as this will damage the PSU and your hardware. SHARKOON warranty does not cover damage caused by incorrect handling. 5.2.2 Connecting mainboard and graphics card(s) 1.
3. In case your PCIe graphics card is equipped with an additional power connector, also plug the respective 6-pin or 6+2-pin PCIe power connector (fig. 3) which will provide a stable power support for your graphics card. fig. 3 Note: A maximum of 2 graphics cards with 6+2-pin power plug can be connected to this PSU.
5. Turn the power switch off and back on several times with a minimum cycle pause of 5 seconds. 6. In case the PSU still does not start, contact support@sharkoon.com. 7. Cable diagrams and pin assignments 20+4-pin ATX power connector 4+4-pol.
Page 14
SATA power connector Adapter cable (4-pin peripheral to 4-pin floppy) Attention: As a continuing policy of product improvement at SHARKOON, the design and specifications are subject to change without prior notice. National product speci- fications may vary. All rights reserved especially (also in extracts) for translation, reprinting, reproduction by copying or other technical means.
Need help?
Do you have a question about the Silent Storm SHA460-135A and is the answer not in the manual?
Questions and answers