Subscribe to Our Youtube Channel
Related Manuals for Sharkoon WPM Series
Summary of Contents for Sharkoon WPM Series
- Page 1 MODULAR ATX 2.0 POWER SUPPLY Handbuch Manual Manuel d‘utilisation Guia usario Manuale d´istruzioni Gebruiksaanwijzing Guia usário Instukcja obstugi ユーザー マニュアル 使用手冊 WPM SerieS...
-
Page 2: Table Of Contents
5.2 Connecting the PC components to the PSU 5.2.1 The connectors at a glance 5.2.2 Connecting mainboard and graphics card(s) 5.2.3 Connecting optical drives and other peripheral devices 5.2.4 Connecting the cables to the PSU 5.2.5 Checking all connections 6. Troubleshooting 7. Cable diagrams WPM SERIES... -
Page 3: Features
Dear customer! Congratulations for purchasing one premium quality SHARKOON product. For a long life time and to take full advantage of this product we recommend that you read this manual completely. Have a good time with our product! SHARKOON Technologies 1. -
Page 4: Specifications
To prevent the risk of electric shock, do not open power supply housing. No user-exchangeable parts inside. Refer service and maintenance to autho- rized Sharkoon personnel. Warranty is void under unauthorized attempt to open the power supply housing. Suitable for indoor or office use only. -
Page 5: Temperature Range And Humidity
2 seconds. 3. Over current protection 2.4 Safety standards Our power supply has been certified to comply with CB and CE safety regulations. 2.5 Warranty period For this power supply unit we provide a 2 years warranty. WPM SERIES... -
Page 6: Parts And Accessories
– 2x SATA cables with 3x 15-pin connectors each D – Set with mounting screws E – Cable bag Note: If you are missing any of the items listed above, please contact our customer service immediately: support@sharkoon.com (Germany and Europe) support@sharkoon.com.tw (international). WPM SERIES... -
Page 7: The Modular System Of The Psu
1x PCIe connector cable (6-pin PSU connector) for graphics cards (1x 6-pin connectors) 1x connector cable for peripheral devices (6-pin PSU connector) for optical drives (5 connectors) and floppy (1 connector) 2x SATA connector cables (6-pin PSU connector) for SATA drives (3 connectors) WPM SERIES... -
Page 8: Installation
6+2-pin PCIe power 6-pin PCIe power con- connector nector connector nector Type 1x attached 1x attached 1x attached 1x modular Connector 4-pin connector for SATA power connector peripheral devices 4-pin floppy connector Type 6x modular 5x modular 1x modular WPM SERIES... -
Page 9: Connecting Mainboard And Graphics Card(S)
Do not force to plug the female connector into the male connector in wrong orientation, nor modify any of the components, as this will damage the PSU and your hardware. SHARKOON warranty does not cover damage caused by incorrect handling. -
Page 10: Connecting Optical Drives And Other Peripheral Devices
Finally connect the modular cables to the PSU according to the connector coding (see above 4.). 5.2.5 Checking all connections Make sure that all devices are connected properly then plug the PSU’s power cord to a wall outlet and switch the power supply on. This ends the installation of the PSU. WPM SERIES... -
Page 11: Troubleshooting
PSU. 5. Turn the power switch off and back on several times with a minimum cycle pause of 5 seconds. 6. In case the PSU still does not start, contact support@sharkoon.com. 7. Cable diagrams... - Page 12 4-pin power connector for peripherals + 4-pin power connector for floppy SATA power connectors WPM SERIES...
-
Page 13: Legal Disclaimer
Legal disclaimer: As a continuing policy of product improvement at SHARKOON, the design and specifications are subject to change without prior notice. National product specifications may vary. All rights reserved especially (also in extracts) for translation, reprinting, reproduction by copying or other technical means.
Need help?
Do you have a question about the WPM Series and is the answer not in the manual?
Questions and answers