Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sharkoon REBEL P30 Gold
Summary of Contents for Sharkoon REBEL P30 Gold
- Page 1 Manual...
-
Page 2: Safety Instructions
Safety Instructions This device is only to be used as a power supply unit for powering PCs and is intended exclusively for this purpose. Even when it is not being used for a long period of time, a power supply unit can still possess a high electric charge. - Page 3 Safety Standards and Protections This power supply unit is designed for a household power voltage of 100 - 240 volts. It complies with CE, FCC, UKCA and CB safety standards and is equipped with protection features that are designed to protect the device itself as well as the components connected to it.
-
Page 4: Installation
Installation Remove the old power supply unit from the PC case... - Page 5 Installation Install the power supply unit into the PC case...
- Page 6 PLEASE NOTE! Make sure that only the supplied modular cables are used. The use of other cables (for example, cables from an older Sharkoon PSU series or cables from other manufacturers) can damage the device and the peripheral hardware. Make sure all cables are properly connected and fully inserted into the power supply unit and the peripheral hardware.
-
Page 7: Cooling Options
Cooling Options The Rebel P30 Gold is equipped with two functions for flexibly adjusting the cooling behavior, which are explained below. Zero RPM Mode When the Zero RPM mode is on, the fan rotation is stopped at low and medium loads to enable silent operation. When the load on the system in- creases, the fan will automatically turn on again to cool the power supply unit sufficiently. -
Page 8: Connection Options
Connection Options 850 WATT 2x 24-pin mainboard (M/B) 1x 4+4-pin CPU (CPU) 2x 6+2-pin PCIe (PCI-E) 4x SATA (IDE/SATA) 1x 12VHPWR CABLE SET Connectors Total Type Cable per Cable Connectors 20+4-Pin Mainboard Connector 4+4-Pin Connector 6+2-Pin PCIe Connector 12VHPWR Connector SATA Connector Connector... - Page 9 Connection Options 1000 WATT 2x 24-pin mainboard (M/B) 2x 4+4-pin/8-pin CPU (CPU) 3x 6+2-pin PCIe (PCI-E) 5x SATA (IDE/SATA) 1x 12VHPWR CABLE SET Connectors Total Type Cable per Cable Connectors 20+4-Pin Mainboard Connector 4+4-Pin Connector 6+2-Pin PCIe Connector 8-Pin Connector 12VHPWR Connector SATA...
- Page 10 Connection Options 1300 WATT 2x 24-pin mainboard (M/B) 2x 4+4-pin/8-pin CPU (CPU) 4x 6+2-pin PCIe (PCI-E) 5x SATA (IDE/SATA) 1x 12VHPWR CABLE SET Connectors Total Type Cable per Cable Connectors 20+4-Pin Mainboard Connector 4+4-Pin Connector 6+2-Pin PCIe Connector 8-Pin Connector 12VHPWR Connector SATA...
-
Page 11: Troubleshooting
5. Pull the plug of the power cord out of your wall outlet and leave the power supply unit without power for approximately 10 minutes. This will cause a reset of the protective circuits. If the system still fails to function, please contact support@sharkoon.com... - Page 12 All named products and descriptions are trademarks and/or registered trademarks of the respective manufacturers and are accepted as protected. As a continuing policy of product improvement at Sharkoon, the design and specifications are subject to change without prior notice. National product specifications may vary.
- Page 13 Follow us on Facebook Instagram YouTube TikTok Twitter...
Need help?
Do you have a question about the REBEL P30 Gold and is the answer not in the manual?
Questions and answers