Chapter V: Dvr Installation Guidance; Definition For Interfaces Of Front And Rear Panels; Definition For Interfaces Of Front Panel - Margus H.264 Operation Instruction Manual

Chapter V: DVR installation guidance

5.1 Definition for interfaces of front and rear panels

5.1.1 Definition for interfaces of front panel

Key name Symbol
Power indicator POWER
Running light RUN
Record indicator REC
Network
NETWORK
indicator
Playback
PLAYBACK
indicator
Alarm indicator ALARM
POWER key POWER
Menu key MENU
Escape key ESC
Function
FN
auxiliary key
PTZ control key PTZ
Record search
SEARCH
key
Record state key REC
Fast backward
SLOW/-
key
Fast forward
FAST/+
key
Play key PLAY/PAUSE
Stop key STOP
Switch key SWITCH
▲.▼.. 
Direction key
Enter key ENTER
Function introduction
Power indicator lit means DVR is energized (including shut down state)
Indicate that DVR runs normally after starting up
Indication of record enabled
Light indication for normal connection of network
Light indication for playback state of DVR
Light indication of alarm state
Power switch, press and hold for 3 seconds to shut down
Press Menu key to enter into menu interface
Exit current interface
Auxiliary function, which is equivalent to the right mouse key, it can pop up input
box when input is required.
Enter into PTZ control interface
Open search in playback interface, long press it for 5 seconds to switch between
VGA and monitor output.
Enter into record state setting interface, you can select: auto record, manual record,
stop record
Fast backward playback, 2×, 4×, 8× playback
Fast forward playback, 2×, 4×, 8× playback
Start playing in search state, play/pause
Stop playback of record
Switch between 1/4/8/9/16-picture
Switch currently activated control, move upward, downward, leftward and
rightward
Confirm operation
Page 39 of 49