Table of Contents
Advertisement
Subnet mask: current subnet mask of system
Default gateway: current default gateway of system
Preferred DNS: current preferred DNS of system
Backup DNS: current backup DNS of system
Server port: data and image transmission port number
HTTP port: HTTP port, in general, default value is adopted: 80. If administrator has change the WEB
port to other port such as: 8088, then add port number after IP, when it is required to access the device
through IE, input in address field:http://192.168.1.118:8088
Mobile phone port: mobile phone data and image transmission port number
The page of PPPoE/DDNS is described as follow:
PPPoE/account: set PPPoE account
PPPoE/password: set PPPoE password
DDNS/server: set DDNS server supplier, 3322 and dyndns optional
DDNS/account: set DDNS account
DDNS/password: set DDNS password
Local host domain mane: set DDNS domain name
Refresh: test DDNS to see if it is successful
Steps for the enable of PPPoE function:
Step 1: enter "main menu->network setting->PPPoE/DDNS" page, fill in correct PPPoE account and
password
Step 2: enter "main menu->network setting->basic parameter" page, select PPPoE in address mode, so
as to enable PPPoE dialing.
Steps for the enable of DDNS function:
Step 1: application of DDNS service
The host name, user name and password of DDNS must be registered on DDNS server; take 3322 for
example to guide DDNS registration:
Input http://members.3322.org/ in the address field of IE to carry out the registration of new user,
Page 17 of 49
Advertisement
Table of Contents
