Table of Contents
Advertisement
Address: set the address of corresponding ball machine
Baud rate: select the baud rate used by corresponding ball machine
Protocol: select the protocol of ball machine with corresponding brand type
3.3.8 Hard disk management
Move cursor to 『Hard disk management』 item (glass framed icon means selected), press 【OK】 key to
enter the setting interface of the item, as shown below:
The page of hard disk management is described as follow:
Hard disk space: total space of hard disk
Residual space: total unused space of hard disk
Hard disk state: when it is formatted, the state is normal; otherwise, the state is unformatted
Alarm space: when the residual space of hard disk is less than this value, a "Disk" prompt is displayed
on the top right corner of preview interface, the unit is G
When disk is full: operation when disk is full: stop record and overwrite record optional
Format operation:
Step 1: select the hard disk to be formatted.
Step 2: click Format button to format the hard disk.
3.3.9 Record backup
Move cursor to『Record backup』icon (glass framed icon means selected), press【OK】key to enter
the setting interface of the item, record backup includes backup, as shown below:
The page of backup is described as follow:
Channel: the channel to which record video file belongs
Start stop time: the start time and stop time of record video file
Page 23 of 49
Advertisement
Table of Contents
