Table of Contents
Advertisement
3.3.2 Menu operation
The main menu includes『Record setting』,『Site setting』,『Network setting』,『Alarm setting』,『PTZ
control』and『Hard disk management』,『Record backup』,『System setting』items, as shown below:
Prompt: the settings to all submenus below are valid only after【Save】is pressed; the settings are
invalid when you exit this page directly without pressing Save.
3.3.3 Record setting
Move cursor to 『Record setting』 item (glass framed icon means selected), press 【 OK】 key to enter the
setting interface of the item, record setting includes main stream – sub stream – schedule, as shown
below:
The setting page of main stream is described as follow:
Resolution: D1-HD1-CIF optional
Frame rate: 2-25 frames optional
Coding: fixed stream and variable stream optional
Picture quality: 5 steps adjustable
Prerecording: set the length of prerecording time before alarm occurs
Mode: schedule record, manual record, close record optional
Prompt: when encoding is set as fixed stream, picture quality options are:
30M/H(64K)-60M/H(128K)-120M/H(256K)-240M/H(512K)-480M/H(1M)
When encoding is set as variable stream, picture quality options are: general – acceptable
– good – very good – best
Page 12 of 49
Advertisement
Table of Contents
