Table of Contents
Advertisement
3.3.6 Alarm setting
Move cursor to『Alarm setting』icon (glass framed icon means selected) in main menu interface, press
【OK】key to enter the setting interface of the item, alarm setting includes motion detection – video loss –
alarm input – alarm output, as shown below:
The page of motion detection is described as follow:
Enable: enable motion detection function
Sensitivity: adjust the sensitivity of motion detection
Zone: set effective space zone of motion detection as shown below
Prompt: the selected white zone means that it is not the detection zone of motion detection
Schedule: set affective time zone of motion detection, see 3.3.3 schedule setting page for setting method
Alarm output: set bound alarm output
Delay: set the delay time when the inspection will be done again after motion detection occurred
Record: set the channel of correlating record after motion detection occurred
Click
to enter the following menus
Delay: set the time to delay record after motion detection occurred
PTZ control: set triggering the operation of correlated PTZ after motion detection occurred
Screen prompt: set whether screen prompt is needed after motion detection occurred
Page 20 of 49
Advertisement
Table of Contents
