Table of Contents
Advertisement
The description for entering record operation page is as follow:
Click right mouse in preview state and select "Record control" in pup up menu, or enter into record
operation interface through "shortcut menu" → "Record control". Press "Record/REC" key in
preview mode can also enter into record control operation interface directly, as shown below:
The page of record operation is described as follow:
Schedule record: set the channel to be recorded according to timing, dynamic detection and alarm
setting conditions set in record setting.
Manual record: the highest priority level, after manual button is executed, all corresponding
channels execute manual record, regardless of state that each channel is in.
Stop record: all channels stop record.
3.5.2 Record playback
The system has two methods of record playback: fast playback and record search; when record search
is carried out, you can search file and select playback; you can also play back by time.
The fast playback page is described as follow:
In preview picture, press "PLAY" key or single left click mouse on "
back the video one minute before current time.
The video search page is described as follow:
In preview picture, press "Search" or "shortcut menu" → "Record search" to enter record search.
The file playback page is described as follow:
Channel: the channel to which record video file belongs.
Start stop time: the start time and stop time of record video file
File type: the reason of creating record video file
Size: the size of record video file
Search date: set the time range of search, green background means record video existed, blue
background means certain selected date; underline means the date of the same day.
Search type: set the range of record events to be searched: "timing record", "video alarm",
"external alarm", "manual", "all" optional.
Search channel: set channel range of search
Figure 3-4
" position in toolbar to play
Page 28 of 49
Advertisement
Table of Contents
