Table of Contents
Advertisement
Alarm output: set bound alarm output
Delay: set the delay time when the inspection will be done again after alarm input occurred
Record: set the channel of correlating record after alarm input occurred
Delay: set the time to delay record after alarm input occurred
PTZ control: set triggering the operation of correlated PTZ after alarm input occurred
Screen prompt: set whether screen prompt is needed after alarm input occurred
EMAIL: set whether email is needed to be sent after alarm input occurred
Buzz: set whether buzz is needed to sound sent after alarm input occurred
FTP: set whether snapshot is needed to be sent to designated FTP server after alarm input occurred
The page of alarm output is described as follow:
Enable: enable motion detection function
Type: adjust the type of alarm output, normal open type and normal close type optional
3.3.7 PTZ control
Move cursor to『PTZ control』icon (glass framed icon means selected), press【OK】key to enter the
setting interface of the item, PTZ control includes PTZ control, as shown below:
The page of PTZ control is described as follow:
Page 22 of 49
Advertisement
Table of Contents
